8
Match-Lighting Main Burners
IMPORTANT: When match lighting the barbecue use the control knob closest to the match lighting hole.
Repeat steps 1 to 4 of “Lighting the Main Burners” on page 6.
5. To match light: push in and turn the far left burner control knob counter
clockwise to the “MAX” position.
6. Immediately strike a match or use a butane lighter and position through the
lighting hole on the left side of the burner box. The burner should light.
7. To light the other burners, press in and turn the nearest control knob. The ame
will track around the burner and light via the carryover tubes. Allow the grill to
preheat with the grill lid closed for 10-15 minutes before cooking.
Lighting the SIDE BURNER (if applicable)
Before operating the side burner, you must rst open the side burner lid.
After using the side burner, wait until the unit is completely cool before closing the side burner lid.
1. Open the side burner lid.
2. Conrm that all burner control knobs are in the “OFF” position before opening the gas supply.
3. Turn on the gas supply valve at the tank (1 to 2 turns) or turn on the main gas supply valve.
4. Turn the burner control knob to the “MAX” position ( ). Wait 5 seconds.
5. Immediately press the igniter button. You will hear rapid clicks. Repeat if necessary.
CAUTION:
If side burner fails to light, immediately turn burner control knob “OFF” and wait 5 minutes before
re-lighting with a match.
Match lighting the SIDE BURNER (if applicable)
1. Open lid. Turn “OFF” all control knobs. Ensure LP cylinder is closed.
2. Turn on the gas supply valve at the tank (1 to 2 turns), or turn on the main gas
supply valve.
3. Turn the side burner control knob to the “MAX” position ( ). Wait 5 seconds.
4. Insert a lit match or a butane lighter under the side burner grate.
CAUTION
If ignition does NOT occur in 5 seconds, turn the burner controls “OFF”, wait 5 minutes and repeat the
lighting procedure. If the burner does not ignite with the valve open, gas will continue to ow out of
the burner and could accidentally ignite with risk of injury. Turn controls and gas source “OFF” when
not in use.
Lighting the ROTISSERIE BURNER (if applicable)
1. Open the BBQ lid.
2. Ensure all control knobs in the “OFF” position before opening the gas supply.
3. Turn on the gas supply valve at the tank (1 to 2 turns), or turn on the main gas supply valve.
4. Turn the Rotisserie burner knob to the “MAX” position ( ). Wait 5 seconds.
5. Press and hold the ELECTRONIC IGNITER button.
CAUTION:
If rotisserie burner fails to light, immediately turn burner control knob “OFF” and wait 5 minutes before
re-lighting with a match.
Model may not be exactly as shown.
Model may not be exactly as shown.
Model may not be exactly as shown.
(18 Seiten)
(26 Seiten)
(64 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern